Mapei Mapegum WPS - 5 kg

Mapei Mapegum WPS is a fast-drying, flexible liquid membrane based on synthetic resin, designed for waterproofing indoor surfaces.

Key Features

• Fast-drying membrane
• Effective waterproofing solution
• Suitable for indoor surfaces
• Elastic material for enhanced flexibility
• Not suitable for damp cementitious substrates

Fast and Efficient Application

Since time is invaluable, Mapegum WPS delivers rapid results. This product ensures quick and efficient waterproofing. Water infiltration is prevented as just one hour after applying the first coat and three hours after the second coat, you are ready to continue with your project.

Versatile Use

Mapei Mapegum WPS is designed to seamlessly fit into your projects. This membrane offers flexibility without compromising reliability, regardless of the surface you need to waterproof. Whether it's walls and floors in bathrooms, shower areas, kitchens, or countertops, Mapegum WPS provides a dependable solution. Additional benefits include its low Volatile Organic Compounds (VOC) content and its application range of 5°C to 35°C. Moreover, flooring can be installed just 12 hours after application, ensuring minimal downtime.

Applications

Mapei Mapegum WPS is suitable for:

• Waterproofing walls and floors in bathrooms and shower areas before the installation of ceramic, mosaic, or natural stone tiles
• Waterproofing walls, floors, and countertops in kitchens
• Application on gypsum board, gypsum plaster, cement plaster, aerated concrete blocks, bonded wood, cement screeds, anhydrite, wooden, and magnesite substrates
• Application over existing ceramic and natural stone surfaces after pre-treatment with Eco Prim T Plus

Instructions for Use

1. Ensure the substrate is dry, clean, and free from oil, grease, paint residues, and other loose materials.
2. For absorbent substrates such as gypsum and cement, apply a suitable primer first, such as Mapei Primer G.
3. Apply Mapegum WPS with a roller or brush in multiple coats, ensuring that each new layer is applied perpendicularly to the previous one once it has dried (1-2 hours drying time per layer).
4. Build up layers to a minimum thickness of 0.8 mm for a consistent and elastic waterproofing membrane.

For detailed instructions and additional application guidance, refer to the product information sheet.

FAQ

Can I apply Mapegum WPS on damp surfaces?

No, Mapegum WPS must be applied to dry and clean substrates. Ensure the surface is free from moisture, oil, grease, and other contaminants before application.

Do I need additional reinforcement on flat surfaces?

No, Mapegum WPS does not require extra reinforcement on flat surfaces. The membrane itself provides the necessary flexibility and strength for waterproofing.

Can Mapegum WPS be used on surfaces that are continuously submerged in water?

No, Mapegum WPS is intended for surfaces that are not continuously submerged in water and are not exposed to rising damp. It is ideal for applications such as bathrooms, shower areas, and kitchens where waterproofing is required but constant water exposure does not occur.